If you have ever sobbed over breaking some of your cosmetics items, raise your hand. We’re certain that this grief has befallen all of us, beauty enthusiasts, at some point or another. We can still clearly recall how my favorite blush shattered into a billion pieces. When we reached out to grab something, it suddenly fell to the ground.
But fortunately, there have been an increasing number of DIY methods available online over the years to save some of them. Even some independent firms are developing goods to aid you in the repair procedure. So try our procedures mentioned below because it’s time to go and fix your makeup.
How to fix broken makeup?
With some creative modifications, you might be able to give it new life while also making little financial savings. The simplest items to repair are by far those made of powder, while certain cream products may also be resurrected. However, there are a few considerations here if you want to know how to fix broken makeup.
1: Re-press
The most often used technique is using a little rubbing alcohol or isopropyl alcohol. A bowl, paper towel, and spoon are also required. You may easily replace alcohol with rosewater if you want to know how to fix broken powder makeup.
Step 1:
First, pour all of your product into a container, then use a spoon to pulverize the pieces into a fine powder.
Step 2:
Depending on the size of the product, add a few drops of isopropyl rubbing alcohol. If more is required, add it later, but start out with a little quantity.
Step 3:
Thoroughly combine the powder and alcohol to produce a goopy-like consistency.
Step 4:
Carefully re-insert the contents into the compact using a spoon or spatula. To prevent air bubbles from developing, smooth it out, tap the container, then set it outside to dry.
Step 5:
Check the product when it is largely dried but still somewhat moist. If you scratch it with your finger, you’ll be able to tell. The perfect stage to cover with a paper towel is when it makes an imprint but doesn’t have much product adhering to your fingertips.
Step 6:
Place a paper towel over the compact and gently press the product down with the palm of your hand or a flat object like a book. This will firmly push the product back into position while ensuring that any extra alcohol is picked up.
Step 7:
Allow it to fully dry for about a day and that’s how your job of fixing powder makeup is done.
2: Loose powder
Making a loose version of your preferred compact face powder is simple. Simply pour the powder that has broken and any remaining pieces into a ziplock bag. With a spoon, smash the fragments of the sealed container into a fine powder from the outside. The powder is then passed through a sieve into a clean container.
Continue stirring it with a spoon until it spills into the container to ensure that all of the fragments are broken up thoroughly and that the final product is a fine, smooth loose powder. When applying setting powders or powder foundations, this makeup solution works well since you don’t need to be as exact as you would with pigmented bronzers or blushes.
3: Remove hard film
When applying bronzer or blush, you may have noticed that the product, which you love so much, suddenly takes on a hard surface and loses its pigmented qualities while your brush doesn’t pick up enough product. This is frequently the result of a film being created on top of the surface due to the transfer of oils on makeup brushes from your face.
When you moisten eyeshadows before using them, it also frequently occurs. There are two methods to save your makeup in this situation. The top layer can first be carefully scraped off, but if you’re not careful, you can waste the product or risk shattering it. The second method requires only tape and is simpler.
Step 1:
You’ll need clear or scotch tape in this step. Some even employ sturdy packaging tape, as we’ve seen.
Step 2:
Cut a little piece and adhere it to the powder’s surface in step two.
Step 3:
Carefully pull it off. The top layer of the product is removed by the hard film, which adheres to the tape. Your favorite product will be restored to its original use after repeating this step up to three times.
4: Seal the edges
Now that you know how to fix broken makeup, do you think you can take care of your smeared lipstick? Maybe not.
Step 1:
Your lipstick should snap off halfway or still have the foundation piece connected for this to work best. For about 6-7 seconds, hold the lighter underneath the top shattered piece. Don’t get too near, though, or it will melt.
Step 2:
Set this component atop the base, carefully pressing it into place.
Step 3:
If it isn’t well fused, move the lights around the exposed edges for around 1-2 seconds to seal it. After letting it set for a while, smooth up any rough edges as necessary.
Step 4:
Store it in the refrigerator overnight to harden and set before using.
5: Melt and repurpose
Knowing how to fix broken makeup is not as easy as it sounds, especially when it comes to fixing your lipstick.
Step 1:
Gather the shattered pieces and remove any remaining lipstick from the lipstick tube.
Step 2:
Place the product into a compact, spherical travel-sized container, such as a lip balm pot.
Step 3:
Microwave the container for a brief period of time to melt the contents and ensure smooth placement. A metal spoon set over a candle can also be used to melt the lipstick, which can then be poured into the container.
Step 4:
After that, let it chill in the refrigerator overnight before applying it with a finger or a lip brush.
Conclusion
You already know how to fix makeup. But, knowing how to fix cracked makeup is not enough. You should also examine your cosmetics carefully, especially liquid or cream products as they lose their freshness faster than powders.
Throw away the merchandise if it has reached its expiry date. Let it go if it has changed color or smells strange because it might be a symptom of germs in your cosmetics. If you know how to fix broken makeup, these tips will come in handy.
Read Also:
